Steps To Solve Itel A12 Hang On Logo
First, you will need to download the device firmware compatible with your phone or you can download from here, but you must check your phone’s version first to avoid bricking the device.
Itel A12 Firmware Links
Next, you will need this driver for connection. Download it here;
Lastly, you will need the tool. We will use Factory Flasher tool and you can download it here;
This Tool is for iTel A11, A12, A13, P12, A42 Plus.
Extract all the files, the firmware is in pac file.
Install the drivers.
Open the extracted Factory flasher tool.
You will find three folders, open bin folder and locate the factory flasher and launch it.
Follow the below steps carefully, and remember to connect in download mode you press volume down and insert USB cable.
NB: The steps below are in three stages, after each stage you remove battery, insert back, press vol down and connect usb cable.
Before beginning, you first load the packet and select the pac file you wish to flash to the device and press the PLAY icon on the tool.
After successful loading of the PAC file, you follow the steps below.