Z3X Easy Jtag Plus Box

Z3X Easy Jtag Plus is an all-in-one service tool for phone boot repair, data recovery, memory programming, and many other features. Supports MMC, ISP, JTAG, NAND, and SPI interfaces.

Z3X Easy Jtag

Z3X Easy Jtag Plus Full Set – Package Content:

  • Z3X Easy-JTAG Plus Box Hardware
  • Z3X preactivated card with EasyJTAG PLUS Activation
  • Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
  • USB A-B cable
  • Adapter set – 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)

Features:

  • One-click device repair
  • Boot repair
  • Data recovery
  • eMMC firmware repair
  • Partition management
  • eMMC service operations
  • SPI memory programming

Hardware features:

  • Updated Host MCU SAM3X8E (comparing to LPC1768 in the old box)
  • Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 and the old box)
  • Updated power management subsystem – full digital PWM with ADC control
  • Added Micro-USB connector (if additional power required)
  • Added VCC and VCCQ switch with overcurrent protection
  • Updated USB device interface: USB 2.0 480 Mbps (high speed)
  • Integrated ISP engine: Z3X high power pro engine (4 MB/s)
  • ISP support 1 and 4 bit* connection
  • Added eMMC 8-bit high-speed interface up to 42 MHz
  • Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
  • Integrated M-PHY* interface
  • Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
  • Integrated self-test core that excludes 90% faults in production
  • Integrated CCID Card Reader for Z3X Software Use

Hardware benefits:

  • Box to Host PC speed increased up to 40 MB/sec
  • JTAG Interface speed increased by 20%
  • eMMC 1 Bit ISP Speed increased up to 4 MB/sec
  • eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
  • eMMC 4 Bit Speed up to 18 MB/sec
  • eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
  • Compatible with 99% host PC systems and OS
  • Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
  • Compatibility with most of the popular eMMC sockets (with supplied adapters)
  • Plug and Play for Windows OS 8/ 8.1/10

eMMC Socket – Features:

  • Made from high-quality materials
  • Over 10K cycles of lifetime performance
  • Support for a wide range of eMMC ICs
  • High-speed up to 40 MB/sec through an 8-bit bus
  • EMI resistant design, low noise components
  • Integrated power logic (no need for additional power source)
  • Surge protection – smart fuse driven (0.5A threshold)

Read also, SONY Xperia Flash tool for Xperia Devices

Leave a Reply

Your email address will not be published.