Z3X Easy Jtag Plus is an all-in-one service tool for phone boot repair, data recovery, memory programming, and many other features. Supports MMC, ISP, JTAG, NAND, and SPI interfaces.
Z3X Easy Jtag Plus Full Set – Package Content:
- Z3X Easy-JTAG Plus Box Hardware
- Z3X preactivated card with EasyJTAG PLUS Activation
- Z3X EMMC socket (BGA153/169, BGA162/186, BGA221, BGA529)
- USB A-B cable
- Adapter set – 5 pcs. (JTAG, ISP 1BIT, ISP 4BIT, U-SOCKET, E-SOCKET)
Features:
- One-click device repair
- Boot repair
- Data recovery
- eMMC firmware repair
- Partition management
- eMMC service operations
- SPI memory programming
Hardware features:
- Updated Host MCU SAM3X8E (comparing to LPC1768 in the old box)
- Updated high-speed FPGA SPARTAN6 (comparing to SPARTAN3 and the old box)
- Updated power management subsystem – full digital PWM with ADC control
- Added Micro-USB connector (if additional power required)
- Added VCC and VCCQ switch with overcurrent protection
- Updated USB device interface: USB 2.0 480 Mbps (high speed)
- Integrated ISP engine: Z3X high power pro engine (4 MB/s)
- ISP support 1 and 4 bit* connection
- Added eMMC 8-bit high-speed interface up to 42 MHz
- Integrated NAND* engine: NFC with 4 KB RAM buffer and ECC
- Integrated M-PHY* interface
- Integrated SPI engine: up to 21 MHz clock for popular SPI memory flash IC
- Integrated self-test core that excludes 90% faults in production
- Integrated CCID Card Reader for Z3X Software Use
Hardware benefits:
- Box to Host PC speed increased up to 40 MB/sec
- JTAG Interface speed increased by 20%
- eMMC 1 Bit ISP Speed increased up to 4 MB/sec
- eMMC 4 Bit ISP Speed increased up to 12 MB/sec (eMMC 5.0+) **
- eMMC 4 Bit Speed up to 18 MB/sec
- eMMC 8 Bit Speed up to 28 MB/sec (eMMC 5.0+)
- Compatible with 99% host PC systems and OS
- Compatibility with old Easy JTAG 1st generation ISP adapters (1 bit)
- Compatibility with most of the popular eMMC sockets (with supplied adapters)
- Plug and Play for Windows OS 8/ 8.1/10
eMMC Socket – Features:
- Made from high-quality materials
- Over 10K cycles of lifetime performance
- Support for a wide range of eMMC ICs
- High-speed up to 40 MB/sec through an 8-bit bus
- EMI resistant design, low noise components
- Integrated power logic (no need for additional power source)
- Surge protection – smart fuse driven (0.5A threshold)
Read also, SONY Xperia Flash tool for Xperia Devices
