Fidetec provides you with the Itel it2192T Flash File download link. The flash tool is also included in the zip file below. This file is factory signed and will fix all software-related issues. It will fix;
- Hang on logo
- Dead or bricked after flashing fix
- Password remove
- Privacy password remove
- Emergency calls only fix
- Full Signal but no calls fix
- Auto rebooting fix
- White display after flashing fix
- Inverted display after flashing fix
- And many more…
The firmware is in PAC format (after extraction) you can flash with the Research Download tool or Upgrade Download tool, Infinity CM2, Miracle Box, or any other box or tool which supports flashing PAC files.
NB: Before flashing, make sure that:
- The battery is charged at least 30% (although some flashing can be done without the battery)
- The phone is switched off
- You have installed Spreadtrum SCI USB drivers on your PC
- You have downloaded the firmware above and extracted it
- You have a PC and a compatible USB cable
Download the flash file from the link below and follow the recommended flashing instructions afterward. Report any broken download links by commenting below.
Important! Make a backup of the existing firmware before flashing.
How to Flash
- Download and Install SPD Driver on your PC
- Download and Extract Firmware File
- Run the SPD Flash tool or the tool you are using and load Package
- Select the PAC file from the extracted folder
- Click Download and connect your switched off Phone by holding the boot keys where necessary.
- Let the process finish, DO NOT Disconnect during flashing.
- When done flashing disconnect and power ON
Itel it2192T Flash File
it2192T-G1814-EnArFr-AROP-20210309
Read also:
- Itel IT2163s Flash File Download
- Itel It5081 Display Fix Upside Down after Flash
- Tecno T473 Firmware Download
- Tecno T340S Flash File
- Tecno T528 Flash File
Advertisements