Tecno Bootloader Unlock Files & Tutorial |

Hassan

4 years ago

In this tutorial, we are going to provide you with the Tecno Unlock Bootloader file and procedure for unlocking. Unlocking your Tecno phone’s bootloader is one of the first steps to customizing your handset up to extreme levels such as;

Rooting,
Installing modules,
Flashing custom firmware,
and more.

The bootloader is a vendor-proprietary image that takes care of the kernel on a device. It basically protects the device state and verifies the integrity of boot and recovery partitions completely.

Install ADB and Fastboot drivers

ADB is necessary to allow you to root or modify your device system files by using the commands properly. While the Fastboot is required to modify the phone’s firmware by sending commands to it.

Enable USB Debugging and Enable OEM Unlock

It’s also necessary for you to turn on the USB Debugging as well as enable the OEM Unlock option on your handset before connecting and using the ADB Fastboot method. To do so:

Open the Settings menu on your handset.
Now, go to the About Phone section > Scroll down to the bottom and you’ll find Build Number.
Tap on it for 7 times quickly and the Developer Options will be enabled on your phone.
Next, go back to the Settings page again, and search for Developer Options.
Here you’ll need to tap on it and turn on the USB Debugging toggle.
Once done, make sure to scroll down a bit, and turn on the Allow OEM Unlocking toggle as well if its greyed out just proceed to the next steps.
After enabling both options, you can close the Settings page.

Supported Models

Tecno AB7	Tecno AC8	Tecno BB4	Tecno BB4K
Tecno BC1S	Tecno BC3	Tecno CA7	Tecno CA8
Tecno CA8S	Tecno CB7	Tecno CB7J	Tecno CC6
Tecno CC7	Tecno CC9	Tecno CD6	Tecno CD6j
Tecno CD6S	Tecno CD7	Tecno CD8	Tecno CD8j
Tecno CE7	Tecno CE7j	Tecno CE8	Tecno CE9
Tecno CE9h	Tecno CF7	Tecno CF7k	Tecno CF7s
Tecno CF8	Tecno CG6	Tecno CG6j	Tecno CG7
Tecno CG8	Tecno F4 PRO	Tecno ID3K	Tecno ID5
Tecno ID5A	Tecno ID5B	Tecno ID6	Tecno IN1
Tecno IN1 PRO	Tecno IN2	Tecno IN6	Tecno KB2
Tecno KB2H	Tecno KB2j	Tecno KB3	Tecno KB7j
Tecno KB8	Tecno KC1	Tecno KC1h	Tecno KC1j
Tecno KC2	Tecno KC2j	Tecno KC3	Tecno KC6
Tecno KC6s	Tecno KC8	Tecno KC8s	Tecno KD6
Tecno KD6A	Tecno KD7	KD7H	Tecno KD7S
Tecno KE5	Tecno KE5J	Tecno KE5K	Tecno KEFS
Tecno KE6	Tecno KE6J	Tecno KE7	Tecno KF6
Tecno KF6H	Tecno KF6i	Tecno KF6j	Tecno KF8
Tecno LA7 PRO	Tecno LB7	Tecno LB8	Tecno LB8A
Tecno LC6	Tecno LC6A	Tecno LC7	Tecno LC7S
Tecno LC8	Tecno LD7	Tecno LD7j	Tecno RA8

DOWNLOAD BOOTLOADER UNLOCK FILE

Steps for Tecno Bootloader Unlock

First Method

Enable USB Debugging and OEM Unlock
Connect your Tecno Mobile Device to PC
Open Command Prompt by double clicking on Tecno Mobile Bootloader Unlocking.bat file
Follow the prompts on the window
DONE!

Second Method

Extract the file on PC.
Connect Tecno phone to the PC.
Next, wait for the computer to detect the connected device.
Once done, the USB driver will be installed on the PC.
Go to the extracted file on the PC > press the Shift key + Right-click on the mouse.
Select the Open PowerShell window here or Open Command Window here from the popup. If prompted click on Yes to allow admin access.
Then type the following command line inside the CMD window and hit Enter to check whether your device is connected to ADB or not:

adb devices

If you see a popup on the device screen to Allow USB Debugging on your phone, tap on OK to proceed.
Type the following command line and hit Enter to restart your device into bootloader:

ADB reboot bootloader

Your device will be rebooted to Fastboot mode.
Issue the following command to unlock bootloader for your Tecno Mobile device:

fastboot flashing unlock

fastboot reboot

You will have your Tecno Mobile Bootloader Unlocking completed upon issuing the above commands.

Set up your device and check-in developer option if OEM is enabled and greyed out. Congratulations!

Read also,

Hassan