Site icon Fidetec

Medusa Pro Box with eMMC Socket Adapter

Hassan

Medusa PRO Box is a professional programmer for phone loader repair, allowing you to work with flash memory and recover data. Intended for servicing Samsung, Huawei, LG, Motorola, Siemens, Sony Ericsson, Vodafone, ZTE, and other devices via UART, USB JTAG, MMC, and ISP interfaces.

Medusa Pro eMMC Socket Adapter is intended for direct EMMC memory chips connection with the wide range of supported BGA types.

Compatible eMMC:

PRICE: 160-190 USD

Package Contains:

Medusa Pro Box Set:

Medusa Pro eMMC Socket Adapter:

Medusa PRO Box Features

  1. Fast USB 2.0 high-speed hardware
  2. JTAG support for ARMv5, ARMv6, ARMv7
  3. Up to 24MHz JTAG speed
  4. Transfer speed via JTAG interface up to 1 MB/s
  5. eMMC support up to MMC 5.0 standard
  6. 1-bit and 4-bit MMC bus modes are supported
  7. Standard 20-pin JTAG interface
  8. Built-in USB CCID smart card reader
  9. Built-in RJ45 Multiport, Unibox capable

Software Features:

  1. Full-featured professional-grade Medusa PRO software
    The software fully supports all operations (Read, Write and Edit) with any required memory sections through JTAG, USB, and MMC interfaces.
  2. Easy and smart Graphical User Interface (GUI), suitable for beginners and for experts
  3. Fast repair of target device with Smart-Repair-Files (SRF)
  4. SRF contains partition data and other necessary data (help files and diagrams)
  5. Data in SRF is compressed (less to download, quicker to work)
  6. Built-in Partition Manager
    Now you can edit and save required for your work partitions, this leads to a convenient and easy way to service devices. In addition, with Partition Manager, you may open a Full Flash file in binary format, edit it and write it back to the device.
  7. Simple per-partition operations (Read, Write, Erase, Edit) of the target storage device
  8. Built-in Smart-Repair-File Constructor with Partition Manager for creating custom SRFs
    SRF file could be taken from the device or read out from the Full Flash file in binary format. This feature allows the user (without the developer’s assistance) to add devices to the list of supported models, which are not officially supported yet. Users will be allowed to upload that custom SRF file into a separate section of the Support Zone for further analysis by developers. If the custom SRF file would be recognized as a legitimate and correct, name (or nickname) of the author will be presented in the following update. Thus, the user has been given the opportunity to participate in the development of Medusa PRO and became known in certain circles.
  9. Built-in Download manager
    Allows you to download files directly from the software.
  10. NAND, OneNAND, NOR, and eMMC storage devices are supported via the JTAG interface
  11. NAND, OneNAND, and eMMC storage devices are supported via a USB interface
  12. eMMC storage devices are supported via the MMC interface
  13. Up to 1 MB/s transfer speed via JTAG interface *
  14. Up to 6 MB/s transfer speed via MMC interface with 4-bit bus *
  15. Up to 2.2 MB/s transfer speed via MMC interface with 1-bit bus *
  16. Windows 10 compatible software

* All measurements were done on ASUS M5A97 R2 motherboard with AMD FX-8370 CPU and with Medusa PRO Box connected to USB 3.0 port, located directly on the motherboard.

Read also, Miracle Ninja EMMC Box

Supported CPUs:

Supported eMMC Models:

Supported Flash Vendors:

Supported Flash Devices:

Comparison Table

HardwareMedusa ProMedusa
USB 2.0 High-speed+USB 2.0
JTAG support for ARMv5, ARMv6, ARMv7++
Up to 24MHz JTAG speed+12 MHz
eMMC support up to MMC 5.0 standard+–
1-bit and 4-bit MMC bus modes are supported+–
Standard 20-pin JTAG interface+RJ50
Transfer speed via JTAG interface, Up to…1 MB/s225 KB/s
Transfer speed via MMC interface with 4-bit bus, Up to…6 MB/S–
Transfer speed via MMC interface with 1-bit bus, Up to…2.2 MB/s–
USB CCID Smart Card Reader+–
RJ45 Multiport, Unibox Capable+–
SoftwareMedusa ProMedusa
Partition Manager+–
SRF Constructor+–
Built-in C scripting language for advanced usersupcoming feature–
Exit mobile version