Below is the Jio Phone Next Test Point for FRP, password unlock, MDM remove, dead-boot fix, unlocking, flashing, and many more, using supported tools. It serves as a gateway for users who want to take control of the device’s software. Test points will enable the following modes:
- EDL Mode
- Qualcomm HS-USB QDLOADER
- Brom Mode
- MTK download mode
- Huawei USB COM 1.0
- SPD diag
- Download Mode
Jio Phone Next Test Point
How to use test points
- Power off the device
- Carefully remove the phone’s back cover. Information about disassembling the phone is available online, especially on YouTube.
- Be careful not to damage any internal parts when removing the back cover.
- Locate the test points from the motherboard.
- Using tweezers or an alternative tool short the test points if they are two depending on the phone model. BUT if it’s just one point then short the point with ground.
- Connect your USB cable while still holding the points to enter the desired mode.
- Once connected to the PC or software, you can release the tweezers.
- Done!
- Be careful not to damage the points with sharp tweezers; just hold it gently.
Read also: Infinix X624B DA File Free Download | Infinix Hot 7 DA File
